Published on Friday, July 23, 2010 by admin A New Trick To Fix Your Xbox 360 From RROD red ring of death. and E74. I found a new way to fix it. In Less than 10 minutes. A tutorial that shows you how to fix it without removing xclamps or how to reflow the xbox. i use a heatgun to fix it. Heat up the xbox 360 motherboard. No penny trick, over heating. how to fix your xbox 360 freezing problem. xbox.com avatar ...

Published on Saturday, July 17, 2010 by admin PART 3 OF 3 ITEMS NEEDED: 8 NUTS THERMAL COMPOUND OR PASTE T8 AND T10 SCREWDRIVER, (T10 NOTNECESSARY) AND MAN POWER :D THIS IS A WAY BETTER WAY OF FIXING YOUR XBOX 360 CONSOLE WITHOUT HAVING TO PAY LOADS OF MONEY OR USING THINGS SUCH AS THE :TOWLE TRICK :OVEN TRICK :XCLAMP FIX :HOT AIRGUN FIX :PENNY TRICK THIS IS UNIQUE :D hope i helped, an...

Published on Wednesday, July 14, 2010 by admin How to fix your Xbox 360 like the Pros do. The heatgun fix is THE best way to fix a stubborn Xbox 360. Please don't think this is part of the x-clamp fix cos it ain't! It is an EXTREME fix and takes skill. Do not attempt if under 18 without an adult present. I made this vid cos all the others out there were terrible so count this as the 'OFFICIAL' HOW TO FIX with a he...

Published on Tuesday, July 13, 2010 by admin PART 2 OF 3 ITEMS NEEDED: 8 NUTS THERMAL COMPOUND OR PASTE T8 AND T10 SCREWDRIVER, (T10 NOTNECESSARY) AND MAN POWER :D THIS IS A WAY BETTER WAY OF FIXING YOUR XBOX 360 CONSOLE WITHOUT HAVING TO PAY LOADS OF MONEY OR USING THINGS SUCH AS THE :TOWLE TRICK :OVEN TRICK :XCLAMP FIX :HOT AIRGUN FIX :PENNY TRICK THIS IS UNIQUE :D hope i helped, a...

Published on Saturday, July 10, 2010 by admin PART 1 OF 3 ITEMS NEEDED: 8 NUTS THERMAL COMPOUND OR PASTE T8 AND T10 SCREWDRIVER, (T10 NOT NECESSARY) AND MAN POWER :D THIS IS A WAY BETTER WAY OF FIXING YOUR XBOX 360 CONSOLE WITHOUT HAVING TO PAY LOADS OF MONEY OR USING THINGS SUCH AS THE :TOWLE TRICK :OVEN TRICK :XCLAMP FIX :HOT AIRGUN FIX :PENNY TRICK THIS IS UNIQUE :D hope i helped, ...

Published on Wednesday, June 16, 2010 by admin This is a quick tutorial on how to open your xbox 360 console in preperation for the penny or x-clamp fix.Duration : 0:5:54 (more...)...

Published on Friday, June 11, 2010 by admin *NEW* i found a new way to fix the "open tray error" i hope this helped ! A very easy tutorial that will fix the "open tray error" ( 100% working ) You don't need to open your xbox , tap on it , damage it or void you warranty NOTE! i will not be held responsible for any damage to your xbox ! do at your own risk :) Thanks and Subscribe Adam WaitheDurati...

Published on Wednesday, May 26, 2010 by admin you will be using a heat gun set at a temperature of 500 degrees to heat the ram, CPU, GPU and south bridge chips on the xbox 360 motherboard. some repairs say that letting the 360 overheat on its own during a repair is enough to melt the solder back together, but you need excessive amounts of heat in order to do this. once completed, your 360 will be completely fixed...

Published on Thursday, May 13, 2010 by admin Here I have an xbox with E74 error. The xclamp fix was no longer working. So I had to reflow the GPU and the H(ANA) chip. If you have any questions that ask me. This can fix most RROD errors. Check out http://xbox-experts.com/errorcode/ to see more about error Things I used Griddle(walmart) Heat gun(home depo) Foil tape(walmart-home depo) ARTIC SILVER 5(radio ...

Published on Monday, May 3, 2010 by admin Quick & dirty video. Thanks to the website 360mods. This is the only place online that address it. Simple fix for such a complicated piece of machina.Duration : 0:9:4 (more...)...